LP38503ATJ-ADJ/NOPB – Texas Instruments 600mV~5V 3A Linear Regulator (Ldo)

LP38503ATJ-ADJ/NOPB is a Texas Instruments linear regulator (LDO) in TO-263-5, with Operating/input voltage 5.5V, Output Voltage 600mV~5V, Output Current 3A, Operating Temperature -40℃~+125℃@(Tj). Verify the exact orderable code, electrical/mechanical limits and system-level requirements before substitution or production release.

Request a Quote
SKU: LP38503ATJ-ADJ/NOPB Category: Tag: Brand:
Certifications
Company Certifications
Texas Instruments

Texas Instruments is a semiconductor manufacturer focused on analog and embedded processing technologies. Its portfolio covers power management, amplifiers, data converters, interface and isolation devices, sensors, logic, microcontrollers, processors, motor drivers, RF products and other building blocks used in electronic systems. TI supports applications across industrial automation, automotive electronics, communications equipment, personal electronics, data-center infrastructure and other embedded markets.

For engineers, the brand is relevant across both signal-chain and power architectures: TI components can be used to sense and condition real-world signals, convert and manage power, move data between interfaces, and provide embedded control or processing. The company also maintains manufacturer documentation, design tools and technical resources for a large number of orderable devices.

HKEQGOO brand pages group Texas Instruments electronic components by exact manufacturer part number so buyers and engineers can compare the specific device, package and application fit required for a BOM. Product availability, date code and inspection requirements should be confirmed separately for each quotation.

View more Texas Instruments products →
Questions about LP38503ATJ-ADJ/NOPB – Texas Instruments 600mV~5V 3A Linear Regulator (Ldo) ?

Key Selection Information

Selection Parameter Confirmed Information
Package TO-263-5
Operating/input voltage 5.5V
Output Voltage 600mV~5V
Output Current 3A
Operating Temperature -40℃~+125℃@(Tj)
Number of Outputs 1
Output Configuration Positive

Product Overview

LP38503ATJ-ADJ/NOPB is a Texas Instruments linear regulator (LDO) identified by the exact orderable code LP38503ATJ-ADJ/NOPB. Its confirmed technical identity includes Operating/input voltage 5.5V, Output Voltage 600mV~5V, Output Current 3A, Operating Temperature -40℃~+125℃@(Tj).

The exact device is described as: 600mV~5V Positive Adjustable TO-263-5 Voltage Regulators – Linear, Low Drop Out (LDO) Regulators. Selection should be based on the exact package and the operating conditions required by the design, rather than on a nearby family member or a generic part number.

Technical Specifications

Parameter Value
Package TO-263-5
Operating/input voltage 5.5V
Output Voltage 600mV~5V
Output Current 3A
Operating Temperature -40℃~+125℃@(Tj)
Number of Outputs 1
Output Configuration Positive
Features Over Current Protection;Short Circuit Protection;Thermal shutdown;Enable control
Output Type Adjustable

Exact-Part Selection Insight

The exact part combines an output-voltage condition of 600mV~5V with an output-current rating of 3A. Verify the stated test/operating conditions and thermal path before treating both limits as simultaneously achievable in the final circuit.

Selection Notes

  • Package: TO-263-5
  • Operating/input voltage: 5.5V
  • Output Voltage: 600mV~5V
  • Output Current: 3A
  • Operating Temperature: -40℃~+125℃@(Tj)

Application Fit

This exact part is appropriate for designs that require a linear regulator (LDO) with the confirmed package and electrical/function parameters above. Final fit depends on the surrounding circuit, interface, thermal and mechanical requirements of the target design.

Design Considerations

Confirm the available supply rail stays inside the stated operating range, including startup and transient conditions.

Check current, power dissipation and board thermal conditions at the intended operating point rather than using the headline rating alone.

Use the exact TO-263-5 footprint/package definition when checking PCB land pattern, assembly clearance and sourcing equivalence.

Related Engineering Resources

  • Datasheet — verified HKEQGOO-hosted technical document for this exact product identity.

Alternative Parts

The following source-displayed parts may be useful for engineering comparison. They are not claimed to be drop-in replacements; verify electrical ratings, package, pinout, lifecycle, and application conditions before substitution.

  • LP38501TJ-ADJ/NOPB — TI; TO-263-5
  • LP38501TSX-ADJ/NOPB — TI; TO-263-5
  • LP38501ATJ-ADJ/NOPB — TI; TO-263-5
  • LP38503TS-ADJ/NOPB — TI; TO-263-5
  • LP38501TS-ADJ/NOPB — TI; TO-263-5
  • LP38503TJ-ADJ/NOPB — TI; TO-263-5
  • LP38503TSX-ADJ/NOPB — TI; TO-263-5

Quality & Verification Support

Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.

Request a Quote

To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.

Alternative Candidates for Engineering Evaluation

Candidate alternative parts require engineering verification before substitution. Electrical characteristics, pinout, package, qualification, and application requirements should be verified before use.

MPN Manufacturer Package
LP38501TJ-ADJ/NOPB TI TO-263-5
LP38501TSX-ADJ/NOPB TI TO-263-5
LP38501ATJ-ADJ/NOPB TI TO-263-5
LP38503TS-ADJ/NOPB TI TO-263-5
LP38501TS-ADJ/NOPB TI TO-263-5
LP38503TJ-ADJ/NOPB TI TO-263-5
LP38503TSX-ADJ/NOPB TI TO-263-5
Package

TO-263-5