ADM7150ACPZ-5.0-R7 LFCSP-8(3×3) – Analog Devices

LDO regulator with 800mA output current, 5V output range, and 16V supply.

Add to RFQ View Datasheet
SKU: ADM7150ACPZ-5.0-R7 Category: Tag: Brand:
Questions about ADM7150ACPZ-5.0-R7 LFCSP-8(3x3) – Analog Devices ?

Procurement Snapshot

Procurement Field Value
Exact MPN ADM7150ACPZ-5.0-R7
Manufacturer Analog Devices
Package LFCSP-8(3×3)
Availability Contact for current stock and lead time
Datasheet Verified PDF

Key Selection Information

Selection Parameter Confirmed Information
Output Voltage 5V
Output Current 800mA
Operating Voltage 16V
Supply Current (Iq) 4.3mA
Number of Outputs 1
Output Configuration Positive
Operating Temperature -40℃~+125℃@(Ta)
Package LFCSP-8(3×3)

Product Overview

ADM7150ACPZ-5.0-R7 is a Fixed 5V 800mA Ultralow-Noise LDO Regulator from Analog Devices. The exact order code is preserved for BOM, RFQ and incoming-inspection control. The verified package for this listing is LFCSP-8(3×3). This exact order-code variant is specified for a 5V output, which must be preserved when comparing nearby family suffixes. For engineering selection, the most relevant confirmed values include Output Voltage 5V, Output Current 800mA, Operating Voltage 16V, Supply Current (Iq) 4.3mA.

ADM7150ACPZ-5.0-R7 Analog Devices product image

Application Fit

  • Low-noise analog power rails
  • ADC/DAC and precision signal chains
  • RF, clocking and instrumentation supplies

Design Considerations

  • Verify input headroom and dropout at the real load current.
  • Calculate power dissipation and junction temperature at the intended VIN and load.
  • Follow the datasheet capacitor, grounding and exposed-pad recommendations.

Alternative Candidates for Engineering Evaluation

MPN Manufacturer Package
ADM7150ACPZ-5.0-R2 ADI LFCSP-8-WD(3×3)

These candidates are listed by LCSC. Verify electrical characteristics, pinout, package, qualification and application requirements before substitution.

For a 5.0 V ADM7150 design that uses an 8-lead exposed-pad SOIC rather than this compact 3 mm x 3 mm LFCSP, compare ADM7150ARDZ-5.0-R7. Both are 800 mA fixed-output family members, but the RD-8-2 and CP-8-11 mechanical land patterns and thermal layouts differ and require a board-level package review.

If the low-noise rail target is 3.3 V instead of this factory-fixed 5.0 V, compare ADM7150ACPZ-3.3-R7. It is another ADM7150 CP-8-11 LFCSP ordering voltage option: the identical package family does not make its 3.3 V output a direct substitute for a 5.0 V supply requirement.

Quality & RFQ Support

For quotation or inspection requirements, provide the exact MPN, quantity, destination, target Date Code if applicable, and any requested third-party testing before shipment.

Package

LFCSP-8(3×3)