NCP1117DT33RKG TO-252-2(DPAK) – onsemi

Linear regulator (LDO) with 1A output current, 20V input range, and 3.3V output range.

Add to RFQ View Datasheet
SKU: NCP1117DT33RKG Category: Tag: Brand:
Questions about NCP1117DT33RKG TO-252-2(DPAK) – onsemi ?

Key Selection Information

Selection Parameter Confirmed Information
Package TO-252-2(DPAK)
Operating/input voltage 20V
Output Voltage 3.3V
Output Current 1A
Operating Temperature 0℃~+125℃
Number of Outputs 1
Supply Current (Iq) 6mA

Product Overview

NCP1117DT33RKG is a onsemi linear regulator (LDO) identified by the exact orderable code NCP1117DT33RKG. Its confirmed technical identity includes Operating/input voltage 20V, Output Voltage 3.3V, Output Current 1A, Operating Temperature 0℃~+125℃.

The exact device is described as: 3.3V Positive Fixed TO-252-2(DPAK) Voltage Regulators – Linear, Low Drop Out (LDO) Regulators. Selection should be based on the exact package and the operating conditions required by the design, rather than on a nearby family member or a generic part number.

Technical Specifications

Parameter Value
Package TO-252-2(DPAK)
Operating/input voltage 20V
Output Voltage 3.3V
Output Current 1A
Operating Temperature 0℃~+125℃
Number of Outputs 1
Supply Current (Iq) 6mA
Output Configuration Positive
Features Over Current Protection;Thermal shutdown;Enable control;Short Circuit Protection
Output Type Fixed

Exact-Part Selection Insight

The exact part combines an output-voltage condition of 3.3V with an output-current rating of 1A. Verify the stated test/operating conditions and thermal path before treating both limits as simultaneously achievable in the final circuit.

Selection Notes

  • Package: TO-252-2(DPAK)
  • Operating/input voltage: 20V
  • Output Voltage: 3.3V
  • Output Current: 1A
  • Operating Temperature: 0℃~+125℃

Application Fit

This exact part is appropriate for designs that require a linear regulator (LDO) with the confirmed package and electrical/function parameters above. Final fit depends on the surrounding circuit, interface, thermal and mechanical requirements of the target design.

Design Considerations

Confirm the available supply rail stays inside the stated operating range, including startup and transient conditions.

Check current, power dissipation and board thermal conditions at the intended operating point rather than using the headline rating alone.

Use the exact TO-252-2(DPAK) footprint/package definition when checking PCB land pattern, assembly clearance and sourcing equivalence.

Related Engineering Resources

  • Datasheet — verified HKEQGOO-hosted technical document for this exact product identity.

Alternative Parts

The following source-displayed parts may be useful for engineering comparison. They are not claimed to be drop-in replacements; verify electrical ratings, package, pinout, lifecycle, and application conditions before substitution.

  • HT1117AM-3.3 — HTCSEMI; TO-252
  • NCV1117DT33T5G — onsemi; TO-252-2(DPAK)
  • LD1086DT33TR — ST; TO-252-2(DPAK)
  • KF33BDT-TR — ST; DPAK
  • MD7612D33UA2 — Mingda Microelectronics; TO-252-2
  • XBL1117-3.3/MTR — XBLW; TO-252-2L
  • NCV1117DT33T4G — onsemi; DPAK
  • NCP1117IDT33T4G — onsemi; DPAK

Quality & Verification Support

Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.

Request a Quote

To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.

Alternative Candidates for Engineering Evaluation

Candidate alternative parts require engineering verification before substitution. Electrical characteristics, pinout, package, qualification, and application requirements should be verified before use.

MPN Manufacturer Package
HT1117AM-3.3 HTCSEMI TO-252
NCV1117DT33T5G onsemi TO-252-2(DPAK)
LD1086DT33TR ST TO-252-2(DPAK)
KF33BDT-TR ST DPAK
MD7612D33UA2 Mingda Microelectronics TO-252-2
XBL1117-3.3/MTR XBLW TO-252-2L
NCV1117DT33T4G onsemi DPAK
NCP1117IDT33T4G onsemi DPAK

onsemi 3.3 V LDO selection: Compare NCP1117ST33T3G for the standard NCP1117 in SOT-223 rather than this DPAK/TO-252 orderable part, or NCP1117LPST33T3G for a separately specified low-quiescent-current SOT-223 version. The LP family has an 18 V maximum input rating versus 20 V for the standard family; check the exact dropout conditions, PCB footprint, output capacitors and thermal limits. These are selection comparisons, not drop-in replacement claims.

Package

TO-252-2(DPAK)