Device Overview
NCP1117LPST33T3G is the fixed 3.3 V SOT-223 variant of onsemi's NCP1117LP low-dropout regulator family. It is intended for rails that need about 1 A class output capability with integrated current limiting and thermal shutdown.
Confirmed Technical and Ordering Data
| Parameter | Confirmed value | Scope / condition |
|---|---|---|
| Output Voltage | 3.3 V fixed | exact ST33 variant |
| Output Current | 1 A class; output current in excess of 1.0 A | datasheet capability statement |
| Maximum Input Voltage | 18 V | family maximum input |
| Dropout Voltage | 1.4 V max at 1 A | datasheet feature specification |
| Typical Dropout | 1.3 V at 1 A | description-level typical statement; not the maximum guarantee |
| Typical Quiescent Current | 0.55 mA | current onsemi Product Recommendation Tool+ for NCP1117LPST33T3G |
| Protection | Current limit and thermal shutdown | integrated protection |
| Exact Package | SOT-223 | NCP1117LPST33T3G; 4000/reel in current Rev.6 ordering table |
Engineering Selection Guidance
The 18 V figure is the family maximum input-voltage capability, not a statement that 18 V is required for normal operation. For a 3.3 V output, practical input headroom must also account for dropout and dissipation.
The datasheet gives 1.4 V maximum dropout at 1 A and a 1.3 V typical value at 1 A. Keep the typical and maximum values separate when estimating minimum input voltage.
The 1 A-class output capability is thermally dependent. SOT-223 copper area and ambient conditions determine whether the regulator can continuously dissipate the voltage-drop power at high current.
Lifecycle and Procurement
The exact onsemi orderable is present in current manufacturer resources; lifecycle wording is retained as a verification warning rather than overstated as a marketing status. The exact package used on this page is SOT-223. Manufacturer lifecycle information does not state HKEQGOO stock, lead time, MOQ or final availability.

Official Engineering Resources
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment.
Request a Quote
For NCP1117LPST33T3G sourcing, provide the required quantity, destination, target Date Code if applicable, and any inspection or testing requirements.




