LD39050PU33R – STMicroelectronics 3.3V 500mA Linear Regulator (Ldo)

LD39050PU33R is a STMicroelectronics linear regulator (LDO) in DFN-6(3×3), with Operating/input voltage 5.5V, Output Voltage 3.3V, Output Current 500mA, Operating Temperature -40℃~+125℃@(Tj). Verify the exact orderable code, electrical/mechanical limits and system-level requirements before substitution or production release.

Request a Quote
SKU: LD39050PU33R Category: Tag: Brand:
Certifications
Company Certifications
STMicroelectronics

STMicroelectronics is a global semiconductor company that designs and manufactures a broad range of microchips and semiconductor technologies. The company’s product and technology scope includes microcontrollers and processors, analog and power ICs, MEMS sensors, connectivity, discrete devices, automotive semiconductors and embedded solutions. These technologies are used across automotive, industrial, personal electronics, communications infrastructure and connected embedded systems, with manufacturer-controlled documentation and product resources supporting engineering selection and design.

For component buyers and engineers, STMicroelectronics is relevant because its portfolio spans distinct device families and package or performance options that should be selected by exact manufacturer part number rather than by a generic family label. Electrical limits, interface requirements, package, qualification, lifecycle and ordering suffixes can vary between related devices, so the exact orderable code remains the primary identity for BOM control and substitution review.

HKEQGOO groups STMicroelectronics electronic components by exact manufacturer part number so customers can review the specific device, package and application fit required for a BOM. Brand-level information provides context only; availability, lifecycle, date code, compliance, inspection requirements and engineering substitution suitability should be confirmed for the exact part number involved in each quotation.

View more STMicroelectronics products →
Questions about LD39050PU33R – STMicroelectronics 3.3V 500mA Linear Regulator (Ldo) ?

Key Selection Information

Selection Parameter Confirmed Information
Package DFN-6(3×3)
Operating/input voltage 5.5V
Output Voltage 3.3V
Output Current 500mA
Operating Temperature -40℃~+125℃@(Tj)
Number of Outputs 1
Supply Current (Iq) 20uA

Product Overview

LD39050PU33R is a STMicroelectronics linear regulator (LDO) identified by the exact orderable code LD39050PU33R. Its confirmed technical identity includes Operating/input voltage 5.5V, Output Voltage 3.3V, Output Current 500mA, Operating Temperature -40℃~+125℃@(Tj).

The exact device is described as: 3.3V Positive Fixed DFN-6(3×3) Voltage Regulators – Linear, Low Drop Out (LDO) Regulators. Selection should be based on the exact package and the operating conditions required by the design, rather than on a nearby family member or a generic part number.

Technical Specifications

Parameter Value
Package DFN-6(3×3)
Operating/input voltage 5.5V
Output Voltage 3.3V
Output Current 500mA
Operating Temperature -40℃~+125℃@(Tj)
Number of Outputs 1
Supply Current (Iq) 20uA
Output Configuration Positive
Features Enable control;Operating status indication;Short Circuit Protection;Thermal shutdown;Over Current Protection
Output Type Fixed

Exact-Part Selection Insight

The exact part combines an output-voltage condition of 3.3V with an output-current rating of 500mA. Verify the stated test/operating conditions and thermal path before treating both limits as simultaneously achievable in the final circuit.

Selection Notes

  • Package: DFN-6(3×3)
  • Operating/input voltage: 5.5V
  • Output Voltage: 3.3V
  • Output Current: 500mA
  • Operating Temperature: -40℃~+125℃@(Tj)

Application Fit

This exact part is appropriate for designs that require a linear regulator (LDO) with the confirmed package and electrical/function parameters above. Final fit depends on the surrounding circuit, interface, thermal and mechanical requirements of the target design.

Design Considerations

Confirm the available supply rail stays inside the stated operating range, including startup and transient conditions.

Check current, power dissipation and board thermal conditions at the intended operating point rather than using the headline rating alone.

Use the exact DFN-6(3×3) footprint/package definition when checking PCB land pattern, assembly clearance and sourcing equivalence.

Related Engineering Resources

  • Datasheet — verified HKEQGOO-hosted technical document for this exact product identity.

Alternative Parts

The following source-displayed parts may be useful for engineering comparison. They are not claimed to be drop-in replacements; verify electrical ratings, package, pinout, lifecycle, and application conditions before substitution.

  • LD39100PU33RY — ST; DFN-6(3×3)
  • LP38690SD-3.3/NOPB — TI; WDFN-6-EP(3×3)
  • NCP708MU330TAG — onsemi; DFN-6(3×3)
  • LD49100PU33RY — ST; DFN-6(3×3)
  • LD39100PU33R — ST; DFN-6(3×3)
  • LD39150PU33R — ST; DFN-6(3×3)
  • LD39200PU33R — ST; DFN-6(3×3)
  • NCP691MN33T2G — onsemi; TDFN-6-EP(3×3)

Quality & Verification Support

Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.

Request a Quote

To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.

Alternative Candidates for Engineering Evaluation

Candidate alternative parts require engineering verification before substitution. Electrical characteristics, pinout, package, qualification, and application requirements should be verified before use.

MPN Manufacturer Package
LD39100PU33RY ST DFN-6(3×3)
LP38690SD-3.3/NOPB TI WDFN-6-EP(3×3)
NCP708MU330TAG onsemi DFN-6(3×3)
LD49100PU33RY ST DFN-6(3×3)
LD39100PU33R ST DFN-6(3×3)
LD39150PU33R ST DFN-6(3×3)
LD39200PU33R ST DFN-6(3×3)
NCP691MN33T2G onsemi TDFN-6-EP(3×3)
Package

DFN-6(3×3)