Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Package | SOP-8 |
| Voltage – Input(DC) | 5V~24V |
| Output Voltage | 20V |
| Output Current | 16.5mA |
| Number of Channels | 3 |
| Frequency – Switching | 800kHz |
| Features | Over Voltage Protection |
Product Overview
WS2811 is a Worldsemi LED driver identified by the exact orderable code WS2811. Its confirmed technical identity includes Voltage – Input(DC) 5V~24V, Output Voltage 20V, Output Current 16.5mA, Number of Channels 3.
The exact device is described as: 20V 800kHz 3 16.5mA 5V~24V SOP-8 LED Drivers ICs. Selection should be based on the exact package and the operating conditions required by the design, rather than on a nearby family member or a generic part number.
Technical Specifications
| Parameter | Value |
|---|---|
| Package | SOP-8 |
| Voltage – Input(DC) | 5V~24V |
| Output Voltage | 20V |
| Output Current | 16.5mA |
| Number of Channels | 3 |
| Frequency – Switching | 800kHz |
| Features | Over Voltage Protection |
| Operating temperature | -25℃~+85℃ |
Exact-Part Selection Insight
The exact part combines an output-voltage condition of 20V with an output-current rating of 16.5mA. Verify the stated test/operating conditions and thermal path before treating both limits as simultaneously achievable in the final circuit.
Selection Notes
- Package: SOP-8
- Voltage – Input(DC): 5V~24V
- Output Voltage: 20V
- Output Current: 16.5mA
- Number of Channels: 3
Application Fit
This exact part is appropriate for designs that require a LED driver with the confirmed package and electrical/function parameters above. Final fit depends on the surrounding circuit, interface, thermal and mechanical requirements of the target design.
Design Considerations
Confirm the available supply rail stays inside the stated operating range, including startup and transient conditions.
Check current, power dissipation and board thermal conditions at the intended operating point rather than using the headline rating alone.
Use the exact SOP-8 footprint/package definition when checking PCB land pattern, assembly clearance and sourcing equivalence.
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.
