LP38503ATJ-ADJ/NOPB TO-263-5 – Texas Instruments

Linear regulator (LDO) with 3A output current, 5.5V input range, and 600mV~5V output range.

Add to RFQ View Datasheet
SKU: LP38503ATJ-ADJ/NOPB Category: Tag: Brand:
Questions about LP38503ATJ-ADJ/NOPB TO-263-5 – Texas Instruments ?

Key Selection Information

Selection Parameter Confirmed Information
Package TO-263-5
Operating/input voltage 5.5V
Output Voltage 600mV~5V
Output Current 3A
Operating Temperature -40℃~+125℃@(Tj)
Number of Outputs 1
Output Configuration Positive

Product Overview

LP38503ATJ-ADJ/NOPB is a Texas Instruments linear regulator (LDO) identified by the exact orderable code LP38503ATJ-ADJ/NOPB. Its confirmed technical identity includes Operating/input voltage 5.5V, Output Voltage 600mV~5V, Output Current 3A, Operating Temperature -40℃~+125℃@(Tj).

The exact device is described as: 600mV~5V Positive Adjustable TO-263-5 Voltage Regulators – Linear, Low Drop Out (LDO) Regulators. Selection should be based on the exact package and the operating conditions required by the design, rather than on a nearby family member or a generic part number.

Technical Specifications

Parameter Value
Package TO-263-5
Operating/input voltage 5.5V
Output Voltage 600mV~5V
Output Current 3A
Operating Temperature -40℃~+125℃@(Tj)
Number of Outputs 1
Output Configuration Positive
Features Over Current Protection;Short Circuit Protection;Thermal shutdown;Enable control
Output Type Adjustable

Exact-Part Selection Insight

The exact part combines an output-voltage condition of 600mV~5V with an output-current rating of 3A. Verify the stated test/operating conditions and thermal path before treating both limits as simultaneously achievable in the final circuit.

Selection Notes

  • Package: TO-263-5
  • Operating/input voltage: 5.5V
  • Output Voltage: 600mV~5V
  • Output Current: 3A
  • Operating Temperature: -40℃~+125℃@(Tj)

Application Fit

This exact part is appropriate for designs that require a linear regulator (LDO) with the confirmed package and electrical/function parameters above. Final fit depends on the surrounding circuit, interface, thermal and mechanical requirements of the target design.

Design Considerations

Confirm the available supply rail stays inside the stated operating range, including startup and transient conditions.

Check current, power dissipation and board thermal conditions at the intended operating point rather than using the headline rating alone.

Use the exact TO-263-5 footprint/package definition when checking PCB land pattern, assembly clearance and sourcing equivalence.

Related Engineering Resources

  • Datasheet — verified HKEQGOO-hosted technical document for this exact product identity.

Alternative Parts

The following source-displayed parts may be useful for engineering comparison. They are not claimed to be drop-in replacements; verify electrical ratings, package, pinout, lifecycle, and application conditions before substitution.

  • LP38501TJ-ADJ/NOPB — TI; TO-263-5
  • LP38501TSX-ADJ/NOPB — TI; TO-263-5
  • LP38501ATJ-ADJ/NOPB — TI; TO-263-5
  • LP38503TS-ADJ/NOPB — TI; TO-263-5
  • LP38501TS-ADJ/NOPB — TI; TO-263-5
  • LP38503TJ-ADJ/NOPB — TI; TO-263-5
  • LP38503TSX-ADJ/NOPB — TI; TO-263-5

Quality & Verification Support

Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.

Request a Quote

To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.

Alternative Candidates for Engineering Evaluation

Candidate alternative parts require engineering verification before substitution. Electrical characteristics, pinout, package, qualification, and application requirements should be verified before use.

MPN Manufacturer Package
LP38501TJ-ADJ/NOPB TI TO-263-5
LP38501TSX-ADJ/NOPB TI TO-263-5
LP38501ATJ-ADJ/NOPB TI TO-263-5
LP38503TS-ADJ/NOPB TI TO-263-5
LP38501TS-ADJ/NOPB TI TO-263-5
LP38503TJ-ADJ/NOPB TI TO-263-5
LP38503TSX-ADJ/NOPB TI TO-263-5

Related TI selection: For a lower-current adjustable FlexCap LDO, compare LP38502TSX-ADJ/NOPB (1.5 A, TO-263 KTT package, with enable control) with this LP38503ATJ-ADJ/NOPB (3 A, TO-263 NDQ package). The current rating, control-pin implementation and exact package ordering code require independent PCB and thermal checks; this is an engineering comparison, not a drop-in replacement claim.

Package

TO-263-5