Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Package | VSON-6(1.5×1.5) |
| Operating/input voltage | 2.5V~5.5V |
| Output Voltage | 600mV~4V |
| Output Current | 4A |
| Frequency – Switching | 2.2MHz |
| Topology | Buck |
| Operating Temperature | -40℃~+125℃@(TJ) |
Product Overview
TPS62827DMQR is a Texas Instruments DC-DC switching regulator identified by the exact orderable code TPS62827DMQR. Its confirmed technical identity includes Operating/input voltage 2.5V~5.5V, Output Voltage 600mV~4V, Output Current 4A, Frequency – Switching 2.2MHz.
The exact device is described as: Buck Switching Regulator IC Adjustable 0.6V~4V 1 Output 4A VSON-6(1.5×1.5). Selection should be based on the exact package and the operating conditions required by the design, rather than on a nearby family member or a generic part number.
Technical Specifications
| Parameter | Value |
|---|---|
| Package | VSON-6(1.5×1.5) |
| Operating/input voltage | 2.5V~5.5V |
| Output Voltage | 600mV~4V |
| Output Current | 4A |
| Frequency – Switching | 2.2MHz |
| Topology | Buck |
| Operating Temperature | -40℃~+125℃@(TJ) |
| Function | Step-down type |
| Number of Outputs | 1 |
| Features | Light load efficient mode;Output discharge;Operating status indication;Hiccup current limiting;Overcurrent Protection |
| Output Type | Adjustable |
| Switch tube (built-in/external) | Built-in |
| Quiescent Current | 4uA |
Exact-Part Selection Insight
This regulator combines a 2.5V~5.5V operating/input range, 4A output-current rating and 2.2MHz switching frequency. Those three values interact with inductor/diode or FET selection, capacitor ripple requirements and thermal margin; the current rating should not be evaluated independently of input voltage and switching conditions.
Selection Notes
- Package: VSON-6(1.5×1.5)
- Operating/input voltage: 2.5V~5.5V
- Output Voltage: 600mV~4V
- Output Current: 4A
- Frequency – Switching: 2.2MHz
Application Fit
This exact part is appropriate for designs that require a DC-DC switching regulator with the confirmed package and electrical/function parameters above. Final fit depends on the surrounding circuit, interface, thermal and mechanical requirements of the target design.
Design Considerations
Confirm the available supply rail stays inside the stated operating range, including startup and transient conditions.
Check current, power dissipation and board thermal conditions at the intended operating point rather than using the headline rating alone.
Use the exact VSON-6(1.5×1.5) footprint/package definition when checking PCB land pattern, assembly clearance and sourcing equivalence.
Related Engineering Resources
- Datasheet — verified HKEQGOO-hosted technical document for this exact product identity.
Alternative Parts
The following source-displayed parts may be useful for engineering comparison. They are not claimed to be drop-in replacements; verify electrical ratings, package, pinout, lifecycle, and application conditions before substitution.
- TPS62827ADMQR — TI; VSON-6(1.5×1.5)
- TLV62595DMQR — TI; VSON-6(1.5×1.5)
- TPS62827DMQT — TI; VSON-6(1.5×1.5)
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.
Alternative Candidates for Engineering Evaluation
Candidate alternative parts require engineering verification before substitution. Electrical characteristics, pinout, package, qualification, and application requirements should be verified before use.
| MPN | Manufacturer | Package |
|---|---|---|
| TPS62827ADMQR | TI | VSON-6(1.5×1.5) |
| TLV62595DMQR | TI | VSON-6(1.5×1.5) |
| TPS62827DMQT | TI | VSON-6(1.5×1.5) |
