ULN2003APWR — Texas Instruments 7-Channel 50-V Darlington Array in TSSOP-16

Texas Instruments ULN2003APWR is a seven-channel 50-V Darlington low-side driver array in TSSOP-16 with 2.7-kΩ TTL/5-V-CMOS input resistors, integrated clamp diodes and 2000-piece large-reel packaging.

Request a Quote
SKU: ULN2003APWR Category: Tag: Brand:
Certifications
Company Certifications
Texas Instruments

Texas Instruments is a semiconductor manufacturer focused on analog and embedded processing technologies. Its portfolio covers power management, amplifiers, data converters, interface and isolation devices, sensors, logic, microcontrollers, processors, motor drivers, RF products and other building blocks used in electronic systems. TI supports applications across industrial automation, automotive electronics, communications equipment, personal electronics, data-center infrastructure and other embedded markets.

For engineers, the brand is relevant across both signal-chain and power architectures: TI components can be used to sense and condition real-world signals, convert and manage power, move data between interfaces, and provide embedded control or processing. The company also maintains manufacturer documentation, design tools and technical resources for a large number of orderable devices.

HKEQGOO brand pages group Texas Instruments electronic components by exact manufacturer part number so buyers and engineers can compare the specific device, package and application fit required for a BOM. Product availability, date code and inspection requirements should be confirmed separately for each quotation.

View more Texas Instruments products →
Questions about ULN2003APWR — Texas Instruments 7-Channel 50-V Darlington Array in TSSOP-16 ?

Key Selection Information

Selection Parameter Confirmed Information
Channels 7 NPN Darlington pairs
Collector Voltage 50 V
Current 500 mA single-output class
Input Resistors 2.7 kΩ per channel
Input Logic TTL and 5-V CMOS-oriented
Clamp Integrated common-cathode diodes for inductive loads
Grade Standard ULN2003A order-code grade
Exact Package / Packing TSSOP (PW), 16 pins; 2000-piece large reel; marking UN2003A

Product Overview

ULN2003APWR is the standard-grade seven-channel Darlington driver in compact TSSOP-16. It is a long-established solution for converting logic-level commands into low-side relay, lamp and coil drive.

The 2.7-kΩ input resistors distinguish the ULN2003A input interface from ULN2004A, whose larger input resistors target higher-voltage CMOS drive.

This standard APWR order code should not be described with the extended AI temperature grade simply because ULN2003AIPWR shares the same package and core function.

For related devices, see HKEQGOO’s Bipolar Transistor Arrays category.

ULN2003APWR product view

Technical Specifications

Parameter Verified Information
Manufacturer Texas Instruments
Exact MPN ULN2003APWR
Channels 7 NPN Darlington pairs
Collector Voltage 50 V
Current 500 mA single-output class
Input Resistors 2.7 kΩ per channel
Input Logic TTL and 5-V CMOS-oriented
Clamp Integrated common-cathode diodes for inductive loads
Grade Standard ULN2003A order-code grade
Exact Package / Packing TSSOP (PW), 16 pins; 2000-piece large reel; marking UN2003A
Manufacturer Status Active / Production
Part Marking UN2003A

Functional Highlights

TTL/5-V CMOS input network is built in

No external base resistor is normally needed when driven from the intended logic family.

Seven clamp-equipped outputs suit relay and stepper banks

The integrated diode network simplifies multi-coil wiring and protects the Darlington collectors from normal inductive flyback.

Design Considerations

  • Match input logic voltage/current to the 2.7-kΩ ULN2003A network.
  • Use the exact standard-grade temperature limits for qualification rather than AI data.
  • Check VCE(sat) loss and package heat with multiple energized loads.

Product Status and Exact Order Code

Manufacturer status: Active / Production

Texas Instruments lists ULN2003APWR as Active / Production; TSSOP (PW), 16 pins; 2000-piece large tape and reel; marking UN2003A.

Related Engineering Resources

Quality & Verification Support

Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.

Request a Quote

To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.

Package

TSSOP-16