TLC5973DR — Texas Instruments 3-Channel 12-Bit RGB LED Driver with Single-Wire EasySet Interface

Texas Instruments TLC5973DR is a 3-channel constant-current RGB LED driver in SOIC-8 with 12-bit PWM, single-wire 3-Mbps EasySet control, up to 21 V outputs and VCC-dependent sink current up to 50 mA.

Request a Quote
SKU: TLC5973DR Category: Tag: Brand:
Certifications
Company Certifications
Texas Instruments

Texas Instruments is a semiconductor manufacturer focused on analog and embedded processing technologies. Its portfolio covers power management, amplifiers, data converters, interface and isolation devices, sensors, logic, microcontrollers, processors, motor drivers, RF products and other building blocks used in electronic systems. TI supports applications across industrial automation, automotive electronics, communications equipment, personal electronics, data-center infrastructure and other embedded markets.

For engineers, the brand is relevant across both signal-chain and power architectures: TI components can be used to sense and condition real-world signals, convert and manage power, move data between interfaces, and provide embedded control or processing. The company also maintains manufacturer documentation, design tools and technical resources for a large number of orderable devices.

HKEQGOO brand pages group Texas Instruments electronic components by exact manufacturer part number so buyers and engineers can compare the specific device, package and application fit required for a BOM. Product availability, date code and inspection requirements should be confirmed separately for each quotation.

View more Texas Instruments products →
Questions about TLC5973DR — Texas Instruments 3-Channel 12-Bit RGB LED Driver with Single-Wire EasySet Interface ?

Key Selection Information

Selection Parameter Confirmed Information
Channels 3 constant-current sinks
PWM 12-bit / 4096-step grayscale
Interface Single-wire EasySet, up to 3 Mbps
Current 2–35 mA/channel at VCC ≤4 V; up to 50 mA above 4 V
Output Voltage Up to 21 V
Supply 3 V to 6 V
Cascade Unlimited-device serial cascading stated
Exact Package / Packing SOIC (D), 8 pins; 2500-piece large reel

Product Overview

TLC5973DR targets a single RGB LED cluster or long cascaded strings where wiring count matters. One data wire carries 12-bit values to three constant-current sinks and can be daisy-chained through many devices.

The current ceiling depends on VCC: 50 mA/channel is conditional on VCC above 4 V. A design using 3.3 V should not copy the 50 mA headline.

The 21 V output rating allows series/high-forward-voltage LED arrangements, but the sink voltage/current product determines package heat.

For related devices, see HKEQGOO’s LED Drivers ICs category.

TLC5973DR product view

Technical Specifications

Parameter Verified Information
Manufacturer Texas Instruments
Exact MPN TLC5973DR
Channels 3 constant-current sinks
PWM 12-bit / 4096-step grayscale
Interface Single-wire EasySet, up to 3 Mbps
Current 2–35 mA/channel at VCC ≤4 V; up to 50 mA above 4 V
Output Voltage Up to 21 V
Supply 3 V to 6 V
Cascade Unlimited-device serial cascading stated
Exact Package / Packing SOIC (D), 8 pins; 2500-piece large reel
Manufacturer Status Active / Production
Part Marking 5973

Functional Highlights

Single-wire control minimizes harness traces

EasySet can be attractive in distributed RGB clusters where adding clock/chip-select wires is expensive.

12-bit grayscale supports smoother fades than 8-bit drivers

The benefit is most visible at low brightness, provided LED current matching and optical variation are also controlled.

Design Considerations

  • Use the VCC-dependent current limit when choosing R_IREF and LED current.
  • Check sink power at the maximum LED supply/output voltage.
  • Validate cascade timing/data integrity over the actual physical wiring length.

Product Status and Exact Order Code

Manufacturer status: Active / Production

Texas Instruments lists TLC5973DR as Active / Production; SOIC (D), 8 pins; 2500-piece large tape and reel; −40°C to +125°C; marking 5973.

Related Engineering Resources

Quality & Verification Support

Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.

Request a Quote

To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.

Package

SOIC-8