Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Package | SOIC-20-300mil |
| Supply voltage | 3.3V;5V |
| Output Voltage | 3.3V |
| Isolation voltage | 2500 |
| CMTI(kV/us) | 25kV/us |
| Operating Temperature | -40℃~+85℃ |
| Features | Fail-safe circuit |
Product Overview
ADM2582EBRWZ-REEL7 is a Analog Devices digital isolator identified by the exact orderable code ADM2582EBRWZ-REEL7. Its confirmed technical identity includes Supply voltage 3.3V;5V, Output Voltage 3.3V, Isolation voltage 2500, CMTI(kV/us) 25kV/us.
The exact device is described as: 25kV/us SOIC-20-300mil Digital Isolators. Selection should be based on the exact package and the operating conditions required by the design, rather than on a nearby family member or a generic part number.
Technical Specifications
| Parameter | Value |
|---|---|
| Package | SOIC-20-300mil |
| Supply voltage | 3.3V;5V |
| Output Voltage | 3.3V |
| Isolation voltage | 2500 |
| CMTI(kV/us) | 25kV/us |
| Operating Temperature | -40℃~+85℃ |
| Features | Fail-safe circuit |
| ESD Protect | ±15kV |
| Number of Drivers | 1 |
| Number of Nodes | 256 |
| Data Rate(Max) | 16Mbps |
| Communication Mode | Full-Duplex;Half-Duplex |
| Number of Receivers | 1 |
Selection Notes
- Package: SOIC-20-300mil
- Supply voltage: 3.3V;5V
- Output Voltage: 3.3V
- Isolation voltage: 2500
- CMTI(kV/us): 25kV/us
Application Fit
This exact part is appropriate for designs that require a digital isolator with the confirmed package and electrical/function parameters above. Final fit depends on the surrounding circuit, interface, thermal and mechanical requirements of the target design.
Design Considerations
Confirm the available supply rail stays inside the stated operating range, including startup and transient conditions.
Verify interface voltage levels, bus topology and timing/data-rate requirements against the rest of the system.
Use the exact SOIC-20-300mil footprint/package definition when checking PCB land pattern, assembly clearance and sourcing equivalence.
Related Engineering Resources
- Manufacturer product resource — official manufacturer-controlled product information for the exact part or product family.
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.
