AMS1117-3.3V SOT-223 – JSMSEMI

Fixed 3.3 V LDO regulator with up to 1.2 A output current and up to 15 V input supply.

Add to RFQ
SKU: AMS1117-3.3V Category: Tag: Brand:
Questions about AMS1117-3.3V SOT-223 – JSMSEMI ?

Key Selection Information

Selection Parameter Confirmed Information
Regulator Type Fixed positive LDO
Output Voltage 3.3 V
Output Current Up to 1.2 A source-listed rating
Maximum Supply Voltage 15 V
Dropout 1.5 V at 800 mA source-listed value
Package SOT-223

Product Overview

AMS1117-3.3V is a JSMSEMI fixed 3.3 V positive linear regulator in SOT-223. The available source data identifies a 15 V maximum supply rating, a 1.2 A output-current rating and thermal-shutdown capability.

Because this is a linear regulator, usable current is constrained by the input-to-output voltage difference and the thermal path from the SOT-223 tab into the PCB. The current rating should therefore not be treated independently of board copper and ambient temperature.

AMS1117-3.3V product view

Technical Specifications

Group Parameter Value / Condition
Output Nominal voltage 3.3 V
Output Current rating Up to 1.2 A source-listed
Input Maximum supply 15 V
Dropout Source-listed condition 1.5 V at 800 mA
Supply Standby current 5 mA source-listed
Protection Integrated Thermal shutdown
Package Type SOT-223

AMS1117-3.3V additional product view

Functional Highlights

Fixed 3.3 V output simplifies the regulator network

The fixed-output version does not require an adjustable feedback divider.

Thermal dissipation is the main continuous-current constraint

For a linear regulator, power loss is approximately (VIN − 3.3 V) × IOUT. Higher input voltage therefore reduces the current that can be sustained thermally in a small SOT-223 implementation.

Applications / Application Fit

  • 5 V class input rails regulated to 3.3 V
  • General embedded and consumer 3.3 V supply rails
  • Designs already standardized on an AMS1117-style SOT-223 footprint

Design Considerations

Verify the actual datasheet for capacitor requirements and pin assignment before a board substitution.

Check junction temperature with the intended copper area, input voltage and continuous load.

Do not assume interchangeability with similarly named AMS1117 parts from another manufacturer; electrical limits and qualification can differ.

Quality & Verification Support

Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.

Request a Quote

To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.

Package

SOT-223