Product Overview
MPQ6528GVE-AEC1-Z is a Monolithic Power Systems H-bridge gate driver with a confirmed 5 V to 60 V operating input range. The exact variant is AEC-Q100 Grade 1 qualified, uses a QFN-28 package measuring 4 mm × 5 mm, and carries the -Z tape-and-reel ordering suffix.
The gate-drive stage is specified for up to 0.8 A source current and 1 A sink current. These are gate-drive current limits used to assess how the IC can charge and discharge external MOSFET gates; they are not motor-load current ratings.
Confirmed Selection Data
| Parameter | Confirmed value |
|---|---|
| Function | H-bridge gate driver |
| Operating input voltage | 5 V to 60 V |
| Maximum source current | 0.8 A |
| Maximum sink current | 1 A |
| Duty-cycle support | 100% |
| Qualification | AEC-Q100 Grade 1 |
| Package | QFN-28, 4 mm × 5 mm |
| Packing | Tape and Reel (-Z) |
Gate-Drive Selection Notes
The 5 V to 60 V operating range defines the supply environment for the driver. Gate-drive source and sink capability should then be compared separately: the 0.8 A source path controls gate charging, while the 1 A sink path controls gate discharge. Those figures describe the driver output stage rather than the current carried by the external H-bridge load.
AEC-Q100 Grade 1 is an exact qualification attribute of this orderable variant and should be retained when qualification equivalence matters. The QFN-28 4 mm × 5 mm package and -Z reel suffix complete the mechanical and procurement identity.
The documented 100% duty-cycle support is another architecture-level property to preserve when the intended bridge-control scheme relies on that operating mode.
