Device Overview
MID06W0505AGY-3R-Z is a MPS regulated isolated DC/DC converter in a SOICW-16 package. For substitution or design review, the strongest comparison points are Device Function (regulated isolated DC/DC converter), Input Voltage (4.5 to 5.5 V), Output Power (up to 0.6 W).
Selection-Critical Data
| Parameter | Confirmed Data | Why It Matters |
|---|---|---|
| Device Function | regulated isolated DC/DC converter | Defines the device function or architecture that a compatible replacement must preserve before secondary ratings are compared. |
| Input Voltage | 4.5 to 5.5 V | Defines compatibility with the available system input rail and its operating range. |
| Output Power | up to 0.6 W | Defines available output-power headroom under the stated operating conditions; compare it at the same frequency, modulation/load and bias. |
| Isolation Voltage | 3 kVDC | Defines suppression of unwanted coupling between RF paths or switch states at the stated frequency. |
| Efficiency | 53 % (maximum at full load) | Defines conversion loss and therefore input-power demand and heat generation at the stated operating point. |
| Operating Temperature | -40 to +125 degC | Defines the qualified measurement or environmental range that the design must remain within. |
| Exact Package | SOICW-16 | Determines PCB footprint, pinout, mechanical assembly and orderable-variant compatibility. |
Power-Management Selection Notes
At regulated isolated DC/DC converter, the device function defines the device function or architecture that a compatible replacement must preserve before secondary ratings are compared. The input voltage is 4.5 to 5.5 V; this defines compatibility with the available system input rail and its operating range.
53 % is the stated efficiency value. Defines conversion loss and therefore input-power demand and heat generation at the stated operating point. Technical condition: maximum at full load.
-40 to +125 degC is the stated operating temperature value. Defines the qualified measurement or environmental range that the design must remain within.
The exact package is SOICW-16; this determines PCB footprint, pinout, mechanical assembly and orderable-variant compatibility.
The output power is up to 0.6 W; this defines available output-power headroom under the stated operating conditions; compare it at the same frequency, modulation/load and bias. At 3 kVDC, the isolation voltage defines suppression of unwanted coupling between RF paths or switch states at the stated frequency.
