Device Overview
TLE5012BE1000 is the E1000 pre-configured derivative of Infineon's TLE5012B 360° GMR angle sensor in PG-DSO-8. The E1000 variant defaults its three interface outputs to incremental IIF signals while retaining the bi-directional SSC configuration interface.
Confirmed Technical and Ordering Data
| Parameter | Confirmed value | Scope / condition |
|---|---|---|
| Function | 360° GMR-based angle sensor | integrated sine/cosine magnetic-field sensing and digital angle processing |
| Supply Voltage | 3.0 to 5.5 V | operating range, 5.0 V typical |
| Angle Output | 15-bit absolute angle | 0.01° output resolution |
| Sincos Output | 16-bit sine/cosine representation | available through interface data |
| Angle Error | 1.0° max | over lifetime and temperature range with auto-calibration activated |
| Ssc Speed | up to 8 Mbit/s | bi-directional SSC, SPI-compatible |
| E1000 Default Interface | IIF push-pull plus SSC | E1000 derivative default: IFA/IIF_A, IFB/IIF_B, IFC/IIF_IDX |
| Junction Temperature | -40 to +150 °C | automotive operating junction range |
| Qualification | AEC-Q100 | automotive qualification |
| Exact Package | PG-DSO-8 | TLE5012B E1000 derivative |
Engineering Selection Guidance
The operating supply range is 3.0–5.5 V with 5.0 V typical. The 6.5 V values in the absolute-maximum table are stress limits and must not be used as the normal operating ceiling.
Absolute angle is represented with 15 bits at 0.01° output resolution. The headline maximum 1.0° angle error is specifically stated over lifetime and temperature range with auto-calibration activated.
E1000 is the IIF-type derivative: IFA/IFB/IFC default to push-pull IIF_A, IIF_B and IIF_IDX, while SSC remains available up to 8 Mbit/s. This must not be replaced by the default HSM, PWM or SPC configurations of other TLE5012B derivatives.
Lifecycle and Procurement
Infineon currently lists the exact OPN as active and preferred. The exact package used on this page is PG-DSO-8. Manufacturer lifecycle status does not state HKEQGOO stock, lead time, MOQ or final availability.
Official Engineering Resources
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment.
Request a Quote
For TLE5012BE1000 sourcing, provide the required quantity, destination, target Date Code if applicable, and any inspection or testing requirements.
