Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Device type | Broadband SiGe MMIC amplifier |
| Official full OPN | BGA616H6327XTSA1 |
| Bandwidth | DC to 2.7 GHz 3 dB reference |
| Gain | 19 dB typical at 1 GHz |
| Noise figure | 2.6 dB typical at 2 GHz |
| Output P1dB | 18 dBm at 2 GHz |
| Supply current | 60 mA typical |
| Lifecycle | Not for new design |
Product Overview
BGA616H6327 is the shortened ordering/legacy string associated with Infineon’s BGA616 broadband matched SiGe MMIC amplifier; the current full OPN shown by Infineon is BGA616H6327XTSA1. The device is internally matched as a general-purpose Darlington gain block for RF and broadband applications.
Infineon marks the device not for new design. Existing-product sourcing should therefore preserve the exact full OPN and package while new designs should evaluate a supported successor.
Technical Specifications
| Parameter | Confirmed Information |
|---|---|
| 3 dB bandwidth | DC to 2.7 GHz reference |
| Product-page frequency span | DC to 6 GHz family parametric presentation |
| Gain | 19 dB typical at 1 GHz |
| Noise figure | 2.6 dB typical at 2 GHz |
| Output P1dB | 18 dBm at 2 GHz |
| Typical supply current | 60 mA |
| Maximum device current | 80 mA |
| HBM ESD | 1 kV |
| Maximum power dissipation | 360 mW at stated case temperature |
| Package | SOT-343 |
| Full OPN | BGA616H6327XTSA1 |
Design Considerations
Use the exact bias and matching network from the BGA616 datasheet. The apparent 6 V system supply is implemented through the recommended bias arrangement; device terminal limits must still be respected.
Because the device is NRND, BOM risk and lifecycle should be reviewed before new product release.
Related Engineering Resources
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.
