Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Function | GNSS front-end low-noise amplifier |
| Frequency range | 1550 MHz to 1615 MHz |
| Gain | 20.0 dB |
| Noise figure | 0.65 dB |
| Current | 3.6 mA |
| Supply voltage | 1.5 V to 3.6 V |
| Digital enable | 1 V logic-high level |
| Package | PG-TSLP-6-2, 0.7 × 1.1 mm |
Product Overview
BGA 725L6 E6327 is an Infineon-authorized Sales Product Name for the BGA725L6 GNSS low-noise amplifier. The device is optimized for the 1550 MHz to 1615 MHz satellite-navigation band and is intended for front ends supporting systems such as GPS, GLONASS, BeiDou and Galileo.
Infineon specifies 20 dB gain and 0.65 dB noise figure while drawing only 3.6 mA. The official package is PG-TSLP-6-2 with a 0.7 × 1.1 mm footprint, not a generic DFN. That package correction matters for PCB compatibility because the local source label used a different package family name.
Technical Specifications
| Parameter | Confirmed Information |
|---|---|
| Application class | GNSS LNA |
| Frequency range | 1550 MHz to 1615 MHz |
| Gain | 20.0 dB |
| Noise figure | 0.65 dB |
| Out-of-band input IP3 | -2 dBm feature value |
| Input P1dB | -15 dBm feature value |
| Supply voltage | 1.5 V to 3.6 V |
| Current consumption | 3.6 mA |
| Enable threshold | 1 V logic-high feature value |
| RF output | Internally matched to 50 Ω |
| Package | PG-TSLP-6-2, 0.7 × 1.1 mm |
| Current full OPN | BGA725L6E6327FTSA1 |
| Product status | Active and preferred |
Design Considerations
GNSS LNA selection should include blocker behavior, not only noise figure. The out-of-band IIP3 and input compression values determine how the front end behaves near strong cellular or other nearby transmitters, especially when the external prefilter is compact.
The TSLP-6-2 land pattern must be taken from Infineon’s package data. A 0.7 × 1.1 mm body dimension shared with another leadless package does not make a DFN or TSNP footprint interchangeable.
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.
