Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Manufacturer | Infineon Technologies |
| Exact MPN | IPT015N10N5 |
| Product Category | MOSFETs |
| Package | HSOF-8 |
| Packing | 2,000 pcs/reel |
| Configuration | 1 N-channel |
| Drain-Source Voltage (VDSS) | 100V |
| Continuous Drain Current (ID) | 300A |
| On-Resistance (RDS(on)) | 2mΩ@6V |
Product Overview
100 V N-channel OptiMOS™ 5 power MOSFET; exact manufacturer MPN verified.
The low R_{DS(on)} supports high-current, low-conduction-loss designs, but 169 nC gate charge requires a substantial gate driver at high frequency. The 100 V rating is suited to nominal 48–72 V battery systems but leaves transient-margin requirements to the system designer.
Technical Specifications
| Parameter | Verified Information |
|---|---|
| Manufacturer | Infineon Technologies |
| Exact MPN | IPT015N10N5 |
| Functional Category | MOSFETs |
| Package | HSOF-8 |
| Packing | 2,000 pcs/reel |
| Source Catalog ID | C108964 |
| Configuration | 1 N-channel |
| Drain-Source Voltage (VDSS) | 100V |
| Continuous Drain Current (ID) | 300A |
| On-Resistance (RDS(on)) | 2mΩ@6V |
Selection Notes
100 V blocking margin; milliohm conduction loss; 6 V versus 10 V gate-drive performance; TOLL thermal/current layout; switching charge and frequency.
Check VDSS margin, continuous/pulsed current, RDS(on) at the actual gate drive and package thermal impedance together.
Manufacturer Decision-Relevant Notes
V_{DS}: 100 V. ; R_{DS(on)}: typ. 1.3 mΩ, max. 1.5 mΩ at V_{GS}=10 V, I_D=150 A. ; R_{DS(on)}: typ. 1.6 mΩ, max. 2.0 mΩ at V_{GS}=6 V, I_D=75 A. ; Continuous I_D: max. 353 A at T_C=25^°C; max. 250 A at T_C=100^°C, V_{GS}=10 V. ; Pulsed I_D: max. 1,412 A at T_C=25^°C. ; Gate voltage: -20 to +20 V. ; Total gate charge Q_G: typ. 169 nC, V_{DD}=50 V, I_D=100 A, 0–10 V gate drive. ; Operating/storage temperature: -55 to +175^°C.
Design Considerations
-
- Calculate conduction loss using worst-case R_{DS(on)}=1.5 mΩ at the actual V_{GS}, current, and junction temperature. 2. Verify PCB copper, vias, drain-pad construction, and thermal path against the specified TOLL thermal conditions. 3. Confirm gate-driver capability for 169 nC and required switching frequency. 4. Validate avalanche/overshoot so switching transients remain below 100 V and the stated avalanche test conditions are not exceeded.
Application Fit
Forklifts, light electric vehicles, power tools, point-of-load converters, telecom, e-fuses, and synchronous rectification.
Exact Variant and Procurement Notes
PG-HSOF-8, TOLL, 8-pin; datasheet ordering code is exactly IPT015N10N5. The manufacturer page lists the associated packaged orderable variant IPT015N10N5ATMA1 as tape-and-reel, 2,000 units, but this suffix is not part of the requested MPN.
Manufacturer Resources
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. Physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
For IPT015N10N5 quotation, provide the exact MPN, required quantity, destination, target Date Code if applicable, and any inspection or testing requirements.
