Device Overview
Designed as a RF amplifier, Qorvo AG201-63G uses the SOT-363 package. Selection of this exact part is driven primarily by Frequency Range (DC to 6000 MHz), Supply Voltage (5 V), Gain (11 dB).
Selection-Critical Data
| Parameter | Confirmed Data | Why It Matters |
|---|---|---|
| Frequency Range | DC to 6000 MHz (Parameters) | Defines the operating frequency or RF band that must cover the intended signal frequencies. |
| Supply Voltage | 5 V (Parameters) | Defines compatibility with the available board power rail and required bias range. |
| Gain | 11 dB (at 900 MHz) | Sets the signal-level gain budget and must be compared at matching frequency, mode and bias conditions. |
| Exact Package | SOT-363 | Determines PCB footprint, pinout, mechanical assembly and orderable-variant compatibility. |
| Rf Function | RF amplifier | Defines the device function or architecture that a compatible replacement must preserve before secondary ratings are compared. |
| Lifecycle / Procurement | Discontinued | Affects procurement continuity and the risk of selecting the part for a new design. |
| Supply Current | 20 mA typical | Defines DC current demand and thermal load. |
RF Selection Notes
DC to 6000 MHz is the stated frequency range value. Defines the operating frequency or RF band that must cover the intended signal frequencies. Technical condition: Parameters. At RF amplifier, the rf function defines the device function or architecture that a compatible replacement must preserve before secondary ratings are compared.
The gain is 11 dB; this sets the signal-level gain budget and must be compared at matching frequency, mode and bias conditions. Technical condition: at 900 MHz.
At 5 V, the supply voltage defines compatibility with the available board power rail and required bias range. Technical condition: Parameters.
SOT-363 is the stated exact package value. Determines PCB footprint, pinout, mechanical assembly and orderable-variant compatibility.
Discontinued is the stated lifecycle / procurement value. Affects procurement continuity and the risk of selecting the part for a new design.
