Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Device type | Silicon RF switching PIN diode |
| Configuration | Single |
| Reverse voltage maximum | 35 V |
| Forward current maximum | 100 mA |
| Capacitance at VR = 0 V | 1 pF |
| RF resistance | 0.36 Ω |
| Package | SOD323 |
| Product status | Discontinued / End of Life |
Product Overview
The BA592E6327HTSA1 is the exact discontinued Infineon OPN for the BA592 silicon RF switching PIN diode in SOD323. It was designed for RF band switching where low forward RF resistance and low junction capacitance are required from a compact surface-mount diode.
Infineon lists 35 V maximum reverse voltage, 100 mA maximum forward current, 1 pF capacitance at zero reverse bias and 0.36 Ω RF resistance. Because the exact OPN is End of Life, it is primarily relevant to legacy BOM support and exact-part replacement rather than new-design selection.
Technical Specifications
| Parameter | Confirmed Information |
|---|---|
| Technology | Silicon PIN diode |
| Function | RF switching |
| Configuration | Single |
| Reverse voltage maximum | 35 V |
| Forward current maximum | 100 mA |
| Capacitance at VR = 0 V | 1 pF |
| RF resistance | 0.36 Ω |
| Reverse recovery time | 120 ns |
| Package | SOD323 |
| Packing | 3000 tape and reel |
| Product status | Discontinued / End of Life |
Design Considerations
For PIN-diode RF switching, forward-bias current affects RF resistance and therefore insertion loss. Compare the diode at the intended bias current and operating frequency rather than using only the maximum forward-current rating.
A replacement also needs compatible capacitance, RF resistance, bias behavior and package parasitics. A mechanically compatible SOD323 diode is not automatically an electrical substitute for the BA592 in a tuned RF network.
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.
