Key Selection Information
| Selection Parameter | Confirmed Information |
|---|---|
| Function | Integrated smart power stage |
| Output current capability | Up to 90 A |
| Technology | OptiMOS 6 |
| VIN feature range | 4.25 V to 16 V |
| Output-voltage feature range | 0.225 V to 5.5 V |
| Switching frequency | 200 kHz to 2 MHz |
| Package | PG-UFLGA-34-1 |
| Product status | Active and preferred |
Product Overview
The TDA22590XUMA1 is Infineon’s 90 A integrated smart power stage for high-current processor and memory rails. It combines the gate driver, high-side and low-side MOSFET functions and monitoring features in a compact OptiMOS 6 power-stage package.
The device supports a wide operating envelope for modern CPU, GPU, FPGA and DDR power delivery. Infineon specifies up to 90 A output current, switching frequencies from 200 kHz to 2 MHz and a 4.25 V to 16 V input-voltage capability in the feature set. Integrated current and temperature reporting reduce the need for separate sensing functions around the stage.
Technical Specifications
| Parameter | Confirmed Information |
|---|---|
| Technology | OptiMOS 6 |
| Output current | Up to 90 A |
| VIN feature range | 4.25 V to 16 V |
| VOUT feature range | 0.225 V to 5.5 V |
| Switching frequency | 200 kHz to 2 MHz |
| Current-report scaling | 5 µA/A |
| Temperature-output scaling | 8 mV/°C |
| PWM compatibility | 3.3 V tri-state PWM |
| Protection | Fault reporting, overtemperature protection, bootstrap UVLO |
| Power-saving mode | Deep Sleep |
| Package | PG-UFLGA-34-1, approximately 4 × 6 × 0.465 mm |
| Packing | Tape and reel |
| Product status | Active and preferred |
Design Considerations
At 90 A, layout parasitics and thermal spreading are system-level design constraints. The controller-to-stage PWM/telemetry routing, input decoupling and output-current path should follow the recommended package land pattern and current-loop layout.
The smart-stage telemetry is useful only when the multiphase controller expects the same scaling and signaling behavior. Current-sense gain, temperature-output scaling and fault logic should be matched to the controller configuration rather than treated as generic analog signals.
Related Engineering Resources
- TDA22590 Infineon product page and data-sheet package
Quality & Verification Support
Third-party inspection or testing can be arranged according to customer requirements. Testing fees are borne by the buyer. Additional verification requirements can be discussed before shipment. After an order is placed, physical product, label, packaging, and Date Code photos may be provided where appropriate.
Request a Quote
To request a quotation, provide the manufacturer part number, required quantity, destination, target Date Code if applicable, and any testing or inspection requirements.
